How To Solve The Problem Of Silk Screen Machine

In the use of screen printing machines,Silk screen Machine it is inevitable that we will encounter such and other problems. Then when we encounter these problems, how should we solve them, in order to save everyone unnecessary trouble.

The machine does not work in semi-automatic mode. Check the power supply. Check the foot switch and start button. Check whether the controller and inverter alarm. The up and down speed of the machine slows down or it is stuck in the middle of the ascent. This fault is mostly caused by lack of oil on the upper and lower sliders. The motor time is long,Silk screen Machine resulting in the reduction of the motor power,Silk screen Machine the motor needs to be more pulled.

The machine does not move when printing on the right. The left and right inverters alarm. The potentiometer of the machine is faulty. Replace the potentiometer and speed controller with new ones.Silk screen Machine The cylinder movement becomes slower. This type of failure is caused by water ingress or aging of the control solenoid valve or cylinder. Need to replace the new solenoid valve or cylinder.

Manual and semi-automatic all do not work. This type of failure caused the switching power supply of the machine to burn out,Silk screen Machine and a new switching power supply was replaced. During semi-automatic operation, the vertical sliding seat will descend by stepping on the foot switch,Silk screen Machine and the printing seat will not move after it moves to the left. The reason for this failure is that the proximity switch on the left side of the slide is not sensed or there is a problem.


Post time: Sep-17-2022